Don't throw away those $50 bras, just spend 5 minutes and $2 to fix them yourself! I spent about 5 minutes yesterday and a bra that this recently happened to, and now it's back in business- so much better than throwing it out!
I bought the upholstery thread at Joanns for around $2 (regular price is around $3- 40% off coupon), and you can find it with the regular thread. I used the upholstery thread because it's much much thicker and stronger than regular thread, and I only want to have to repair this bra once ;)
You'll also need a teeny tiny piece of duck tape.
Directions:
1. Pull out the underwire a little bit through the hole it is poking through. Use a teeny little piece of duck tape to cover up the sharp end of the metal underwire, so it will be more difficult for it to poke through again. Be sure you don't use too much tape, or it won't fit back through the hole! Push the underwire back down through the hole as far as you can.
2. Thread your needle with the upholstery thread, and start stitching under the hole, and all the way up and over the hole. I used more stitches than I probably needed to, but I'd rather do a really good job once than have to do this multiple times! I stitched under the wire, and then up and over. Tie a knot at the end when you are finished.
3. Apply some fabric glue or clear nail polish over the entire stitched surface. This will give the thin material some extra protection from the wire poking through again.
Not too bad, right? Definitely worth saving $50 for 5 minutes of easy work, don't you think?! I fixed my bra yesterday and it's working just like before- no sharp stabbing for me!
Give this a try, or pin this for when this inevitably happens to you ;)
Be sure to check out my easy tutorial for how to fix any broken powder makeup in just a few minutes with an ingredient you already have at home!
Be sure to check out my easy tutorial for how to fix any broken powder makeup in just a few minutes with an ingredient you already have at home!
xo, Laura
If you liked this project, please follow me on Facebook, Twitter, Pinterest, Bloglovin', and Instagram.
Linking Up Here: Whipperberry, Craft-O-Maniac, Skip To My Lou, C.R.A.F.T., Tidy Mom, 30 Days, Tatertots & Jello, The 36th Avenue, Lolly Jane, Sugar Bee Crafts
Linking Up Here: Whipperberry, Craft-O-Maniac, Skip To My Lou, C.R.A.F.T., Tidy Mom, 30 Days, Tatertots & Jello, The 36th Avenue, Lolly Jane, Sugar Bee Crafts
UUUGH I just threw away a $50 bra because I finally had enough of the under wiring poking me after 2 months.... i sewed it together like that, but didn't use the nail polish, so the stitches came out after a washing.
ReplyDeleteDid you use upholstery thread or regular thread? Regular thread will break, but the upholstery thread is a lot thicker, and should hold up. Also, did you use a lingerie bag to wash your bra? That will help the underwire from poking though again! At least now you know for next time, right? ;)
DeleteMy underwires break in half, on all my bras...I go to a thrift stsore and buy cheap bras my size, take out the underwires, and replace my broken ones. I have to do that several times during the life of my bras. SSSSSooooooooooo frustrating!
DeleteSo smart! This happened to my favorite bra several months ago, but I coldn't bring myself to get rid of it... I figured I should be able to fix it, but duct tape? clear polish? Brilliant!
ReplyDeleteThanks you Amy! I was pretty happy when this worked for me!! Good luck!
DeleteGiven that only one of the underwires generally snaps in most bras, I pull out the unbroken one form a bra I'm about to throw out and keep them (I have a small pile now) in the bottom of my bra drawer. Then, when one breaks in a newer bra, I pull out the broken one and slide in an unbroken one in its place. In saying that, however, I haven't had a single wire break in years - not since I invested in a good quality lingerie bad and machine-wash (even the lacy ones, on a delicate cycle) all my bras. Hand washing (as suggested on most bra labels) doesn't get all the perspiration out of the bra - and it is the perspiration that breaks don the metal wires. Also throwing them in the dryer doesn't help either. Hang them from a skirt hanger (the one with clips) or peg it by the straps and hang from the shower rail or from the doorframe (or use a clothes rack) to allow bras to dry naturally. They'll last so much longer.
ReplyDeleteSo many great tips, thanks Jadziaoz!! Yes, you really aren't supposed to put your bras in the washing machine, but I just can't help myself sometimes! Which I'm sure is why my under wire popped through, lol. Ands yes, a good lingerie bag is definitely the key to keeping your bra together in the wash. Thanks again for the great tips!!
DeleteI am awful about tossing mine in the washer and the dryer. I have four kids and laundry is something that piles up quickly. I wash everything and never hang anything up to dry. One day I will learn to do laundry a different way (maybe). =/
DeleteI hear you, I have four kids, too, and sometimes I just toss mine in the wash as well, which is why I had to come up with a way to fix them, haha! Maybe a good lingerie bag and washing in cold water on delicate if you can't handwash?
DeleteGood Idea. I use hot glue instead of the tape. You can smooth it around the tip after it cools for a second.
ReplyDeleteOoohh, I'll have to try that next time! Thanks for the tip!
DeleteJust done mine but how about fixing the ripped lace on panties, I'm always putting my thumb through the side panel when I put them on.
ReplyDeleteHmmm..... what about stitching another piece of lace over the ripped section? You can find lace at any fabric store, wonder if that would work? I haven't had that problem yet, so I haven't had to deal with that. Good luck!
DeleteYou used to be able to find underwire replacements at JoAnn's which I use to repair mine that break. It has saved me a lot of $$$ and now your idea of the nail polish and duck tape will help even more!! Thanks for this tutorial!
ReplyDeleteYes, I have seen those there. That would be perfect for if your wire actually breaks. Luckily that hasn't happened to me yet, but I know what to do if it does! Thanks for the reminder!
DeleteI happened to have one broken underwire recently. Thanks for the post!
ReplyDeleteYou're welcome Ros, thanks for reading!!
DeleteSo I started doing this in grade 7. not a new trick. also I've sold bras panties before at VS...don't throw your bras in the washer, even the hand wash cycle is damaging. take 10 minutes to hand wash and firmly press excess water out of your bra and you can make them last. don't wash too often. And the right size bra helps prevent this underwire exposure. And never buy a bra from Wal-Mart......ever
ReplyDeleteI never claimed this was a new trick. I'm sure I'm not the first person to think of resewing a bra back together, nor did I ever claim to be. I used to throw my bras away when the underwire poked through, and I know many people who throw theirs away too. My purpose was to let these people know that they don't HAVE to throw their bra away, but that it can easily be fixed.
DeleteLaura, We appreciate your helpful advice , Anonymous , don't be so mean! Also, why so hateful to Walmart? I do agree with your advice to always handwash, but lighten up and please be nice.
DeleteShame on you, nasty Anonymous. Laura is very nicely sharing something many didn't about, and there's no excuse for your disagreeable comment.
ReplyDeleteOmg, thank you soooooo much! I spend hundreds on bras that break and poke through after several months and this is going to end up being a life saver! Thank you, thank you, thank you!
ReplyDeleteYou are most welcome! Be sure not to throw your bras in the washing machine, too, because that is usually the cause of the wire poking through. Better to handwash. Glad I could help!
DeleteI did this with one of my expensive bras but I just sewed it shut. Now I have another one that needs this. I'm gonna put nail polish on this next one. My first one is still holding up.
ReplyDeleteI love that you used duct tape, it can fix anything. :)
Yep, I'm a huge fan of Duck Tape! That's great that your other one is holding up!
DeleteWhat an awesome tip! You just saved me a ton of money, thank you :)
ReplyDeleteYou're welcome, happy to help :)
DeleteThanks for sharing! Last time I had a broken bra I just pulled the underwire out. Haha!! I know right, then I end up with a bra that I hate and I end up throwing it away. I will have to give the a try. I have never heard of the clear nail polish before.
ReplyDeleteHaha, I actually tried pulling the wire out once, too, thinking it would be fine. It was not good! Definitely better to replace than to do without. Thanks for sharing!
DeleteSo useful!! I am so glad that we met at SNAP!!! I have a bra that I need to do this to right now!
ReplyDeleteAwesome, give it a try! I've fixed all mine and haven't had any problems since. Yes, it was great to meet you too :) What a fun weekend that was!
DeleteMine are always popping loose... they're wild that way. haa... I know getting the wrong cup size adds to it but I hate having to spend so much more for the next cup size up. I'm going to try your trick next time. Last time it happened I glued a pencil eraser over the end of the wire and sewed a double layer of denim from an old pair of jeans over the hole and it held up quite well, though of course it didn't match the bra.... you know how it is, desperate times!
ReplyDeleteHey, whatever works, right? Not too many people will be seeing it anyways ;)
DeleteWhen I returned a bra after this happened soon following my purchase, they told me they had "never" heard of that problem! LOL! I hear of women complaining about just that problem all the time! Thank you so much for this ingenious solution, what I had tried so far hadn't worked as well!!!
ReplyDeleteSeriously? That's funny, it seems like this happens to everyone. Good luck, hope this works for you! My bra that I fixes is still going strong :)
DeleteIt worked so well! I can't believe it! (well, I can but you know what I mean)... it's just so solid! I'm so excited I have two "new" bras now! Thank you so much for sharing!!!
DeleteYay, so happy it worked so well for you! And isn't it great to have "new" bras again?! Thanks for reading and coming back to let me know how it went!
DeleteThank you for this, I have 3 bras sitting in my draw all with under wires poking out. I hate when this happens, I pay $80 a bra so am thrilled to give this a go and see if it works. Thank you for sharing.
ReplyDeleteYes, give it a try! It really works, I promise. Yes, when you pay $80 a bra it's really hard to just throw it in the trash, isn't it? Now you don't have to!
DeleteI work at victoria's secret, and there are two common reasons why under wires are coming out of the bra. 1. the bra is the incorrect size or shape or 2. the bra is being washed in the washing machine; it is suppose to be hand washed. I washed mine in the washer one time I then learned my lesson and started hand washing them. Most of the time both of these are the case. If you notice that the under wire is coming out after only a couple months go get re-sized and try on some new styles and let the bra specialist really cater to you, even if you don't purchase a bra at least you'll know your correct size and you wont waste money purchasing something that doesn't fit correctly.
ReplyDeleteGreat advice Cecilia! I know my problem is throwing it in the wash. I know you're not supposed to, b ut sometimes I just do it anyways and cross my fingers and hope for the best... which is porbably why I had to write a tutorial for how to fix a broken underwire bra ;) Thanks for the advice!!
Delete@ Cecelia- I was fitted at Fredericks a few short months ago, instead of VS, due to my very busty frame, and I have only haf my bra a about 3-4 months. I don't do any strenuous activity in this bra and have not gained any weight. I do not wash my bra in that washing machine, or dry it in the dryer. Today my underwire snapped right where the side and top of my ribcage meet. I have not found many bras that fit well around the bust without making larger breasted women look like they have cones for boobs. The reason for me giving this info to you is because I would like to point out that the quality of lingerie has gone downhill quite a bit in the last ten years. I know from personal experience of going to VS when I was in high school, that bras that used to last me all 4 years of highschool, are not even lasting more than one year in college. The underwire used to be more durable, and the bras were stiched better. Simple as that.
ReplyDeleteHI Laura, I also published a underwire bra fix but it's a no-sew version. on-the-go fix (moleskin fix now adapted to our product the Fix A Bra). We've gone to trade shows and have had tremendous response on our blog comments about underwire breakthroughs. Our info shows exactly what you and your readers state. It doesn't matter if you are professionally fitted or hand wash your bras the breakthroughs still happen. We've talked to thousands of women, and have been flashed by hundreds lol and we all agree. Now I have also had defensive responses from people in the lingerie industry but on the flip side we have also had a great response from lingerie stores who carry our product to prevent returns. A bra is a garment that supports weight and as our body moves and as we sit or lay in different positions stress is put on those wires and the fabric incasing it. This of course is my theory. As I sit here in my 2 month old bra that I was fitted in and already has a breakthrough starting. I will definitely recommend your post for those that have wires that push way out of the casing and especially for a permanent fix. Lesley
ReplyDeleteI recently came up with a fantastic solution for this problem - that I have a lot. I bought some iron on twill patches. Twill because it is nice and thick. I just cut a small strip and then use the iron to bond it - has worked for me so far!
ReplyDeleteI've learned that Layne Bryant and VS use the same co. to make their bras. So if you have a bigger bust size LB is a great place to go. They can fit you and help find a style that works best for you.
ReplyDeleteReally? That's interesting!
DeleteI hope I can use your fix-it methods. I have a theory about why these under-wires break. I think it is part of the problem of things being manufactured in China now or elsewhere. I bought bras 40 years ago, and the under-wires lasted longer than the bras. Likely things were still made in the USA. Yes, it is a travesty that the under-wires go bad before the bra. I have been just taking them out when they break and using the bra without. I don't throw out the bra.
ReplyDeleteI wrote yesterday and am clarifying. I read many comments here and agree that it is not the fit, nor how the bra is washed. The under-wires are made of cheap stuff and break easily. They used to be made of strong wire, years ago. I speak from experience, having worn under-wire bras from a young age and now am an older age. (I am *old* enough to know this! :) Young women buying bras now don't know that the products have changed and things weren't always this way. I don't see any way of making manufacturers use quality under-wires. It is possible but more costly to use the strong material. This is a problem for sure. Does anyone here think they can address the problem at the manufacturer? Seems it would take some type of concerted effort to get companies to deal with this. Forgot to leave my name yesterday. ~Sarah Louise
ReplyDeleteAll this time I was just converting into 'sleep bras' LOL :-)
ReplyDeleteTracy @ Ascending Butterfly
Haha, that works too! Except by the end of my day I am done wearing a bra, lol!
DeleteGreat article. Thanks!
ReplyDeleteI've had a problem with the wires poking thru for years. I take a small piece of seam binding, fold in half and stitch it up, over and down the other side. Has saved many a fav bra.
ReplyDelete